Optimum Performance of Pressure Sensitive Application

SUGGESTIONS FOR OPTIMUM PRODUCT PERFORMANCE
FOR MATERIALS WITH PRESSURE SENSITIVE ADHESIVE (PSA) BACKING

In order to assist our customers in obtaining optimum performance and shelf-life from PSA backed material purchased from Aero Rubber Company Inc., we suggest that you consider the following “industry standard” preparation, application and storage guidelines:

SURFACE PREPARATION:

The surface that PSA is to be applied to should be free of dust, mold releases, dirt, oil, moisture or other contaminants in order to assure optimum bond strength. Select a cleaning agent that does not leave a residue such as isopropyl alcohol.

REMOVAL OF BACKING PAPER:

Backing paper must be removed with care. Select a corner area and make sure that you DO NOT grab the adhesive layer, just the backing paper. Then, carefully pull the backing paper off of the adhesive.

CAUTION:

No matter how well PSA has been applied to a material, failure to use caution in removing the backing paper can result in the PSA peeling off right along with the backing paper.

APPLICATION:

Once the surface has been properly prepared, the PSA backed material and the surface to which it is to be applied should both be at a temperature above 72 degrees Fahrenheit before proceeding with application.

STORAGE:

PSA backed material should be stored in a cool dry area, circa 70 ± 6 degrees Fahrenheit to ensure the uniformity and performance of the product. Aero accepts no responsibility for the performance of adhesives that have not been properly stored and/or have been stored by the customer for longer than six (6) months beyond Aero’s ship date.

 

Google + LinkedIn FacebookVimeo